Identifisere bakaksel

Spørsmål, tips & triks angående drivlinje.
Motor, girkasse, mellomaksel & bakaksel.

Moderators: TommyV8, Percy

Post Reply
User avatar
Chevylars
Posts: 5622
Joined: 08 Jul 2006, 23:41
Location: Øvre Romerike

Identifisere bakaksel

Post by Chevylars »

Identifisere bakaksel


GM:
Image
GM CORPORATE 10-BOLT
The GM 10-bolt is named for the number of bolts on the cover; ring gear diameter is 7 1/2 inches. Variations of this can be found in the rear of GM S-trucks and some Isuzus, and in the front of S-trucks.

Image
GM CORPORATE 10-BOLT
This 10-bolt, with a larger 8 1/2-inch ring gear diameter, replaced the Dana 44 that was used in the front of some pre-1977 GMs. It can also be found in the back of 1983-91 1/2-tons and in the front of 1983-87 1/2-tons.

Image
GM CORPORATE 12-BOLT
The stronger 12-bolt, with an 8 7/8-inch-diameter ring gear, can be found in various 1964-82 GM 1/2- and 3/4-ton rearends.

Image
GM CORPORATE 14-BOLT
With a 10 1/2-inch-diameter ring gear, the biggest 14-bolt GM rearend looks much like a Dana 70, and is but a few thousandths of an inch shorter in ring gear diameter. This axle is commonly used with big engines and/or overly large tires. It was used under 1973-87 3/4-tons.

Image
GM CORPORATE 14-BOLT
With a 10 1/2-inch-diameter ring gear, the biggest 14-bolt GM rearend looks much like a Dana 70, and is but a few thousandths of an inch shorter in ring gear diameter. This axle is commonly used with big engines and/or overly large tires. It was used under 1973-87 3/4-tons.

FORD:
Image
FORD 7.5-INCH
The small Ford rear end, which sometimes uses a fiberglass cover, is found in Bronco IIs and non-4.0-liter-powered Rangers. For bigger tires and/or engines, it's usually swapped for a Ford 9-inch.

Image
FORD 8.8-INCH
The 8.8-inch debuted in 1983 Broncos and F-150s, and is now found also in 4.0-liter Rangers and Explorers/Navajos. It is easily distinguished from a 9-inch by having a cover on the back.

Image
FORD 9-INCH
The venerable Ford 9-inch is both readily available and strong. Later models have bigger axle tubes and stronger housings. It was standard under 1966-88 F-150s and Broncos. It also came on many vans and the Lincoln Versailles (a popular axle for swapping because of the Lincoln version's disc brakes with parking brake).

Image
FORD 10.25-INCH
Ford's biggest axle comes with semi-floating shafts in 1983-and-newer F-250s, and as a full-floater in F-250HDs and F-350s. Applications are similar to the big GM 14-bolt and the Dana 70.

MOPAR/AMC:
Image
CHRYSLER 9 1/4-INCH
Mopar's 9 1/4-inch rearend can put a stop (notice the octagonal stop sign cover shape) to rearend woes on many lesser-equipped vehicles. Chrysler has used these since 1969, on 1/2- and 3/4-tons.

Image
AMC MODEL 20
Used in 1976-and-later Jeep CJs, the Model 20 rearend is both strong and weak. An 8 3/4-inch-diameter ring gear provides strength; weaknesses are the housing itself and the axle-to-hub retaining method. Converting to one-piece axles or full-floaters gives this axle better stamina.


For andre akslinger se her:
- http://www.coloradok5.com/axleguide.shtml" onclick="window.open(this.href);return false;
- http://50chevy.freeservers.com/Suspension_Widths.html" onclick="window.open(this.href);return false;
Image

Fast Forward Rock`n Roll
Percy
FrantzenRacing
Posts: 23237
Joined: 10 May 2006, 23:19
Location: 2010 Strømmen N
Contact:

Re: Identifisere bakaksel

Post by Percy »

Er begge bildene 9" Ford ?
Attachments
20150223_145615.jpeg
20150223_145615.jpeg (56.65 KiB) Viewed 1707 times
20150205_203519.jpeg
20150205_203519.jpeg (46.23 KiB) Viewed 1707 times
ImageFrantzen RacingImageImage
Percy
FrantzenRacing
Posts: 23237
Joined: 10 May 2006, 23:19
Location: 2010 Strømmen N
Contact:

Re: Identifisere bakaksel

Post by Percy »

Ingen som kan svare ?
ImageFrantzen RacingImageImage
Post Reply